Forum » The Geeks Corner » Hard Drive Help » Using USB to Sata Adapters

Using USB to Sata Adapters

  • Using USB to Sata Adapters

    First you need to get one :)
    This one is fine for most computers or laptops remember it is made for USB 3.0
    That doesn't mean it won't work with USB 1.1 or 2.0 it will just be the fastest on USB 3.0/3.1. :)
    http://www.newegg.com/Product/Product.aspx?Item=N82E16812400542


    Next you will need a Sata/SSD hard drive.
    Crucial MX500 250GB about $60 (Premier Members)
    https://www.newegg.com/Product/Product.aspx?Item=N82E16820156172


    I suggest plugging the adapter into the drive first, then into the USB ports or ports (Some adapter have two USB leads) I would also have the computer or laptop turned on. Just to make sure you don't have any boot problems.

    This is a new drive without a MBR or GPT and no partitions. So it's not going to just show up. :) You will need to initialize the hard drive, create a partition or partitions and format it. If you are using Linux or Windows use NTFS. If you are going to use the drive on a Apple OS use the slower Fat32 (Fat32 also limits your file size to 2 gigs per file)

    To set the drive up you need to open Computer Management. There are a couple ways to do this. The easy way is to open your Windows File Explorer, Right click My Computer, Computer, This PC...what ever the name is on your system. Then left click Manage. If you can't find that open a run box type compmgmt.msc hit enter. (Windows Key + R brings up the run box in windows 8) That command works in Vista, Windows 7, Windows 8, Windows 8.1 & Windows 10.

    After Computer Management is open left click Disk Management. Now you should see the question about initializing the hard drive.
    If you plan to have more then four partitions you need to use GPT (GUID Partition Table) or if the drive is larger then 4 Terabytes. https://en.wikipedia.org/wiki/GUID_Partition_Table If you're using the drive just for a back-up drive (one partition) MBR (Master Boot Record) should be fine.


    After that is finished it takes about 3 seconds :) Right Click on the new hard drive and select FORMAT. The default settings
    should be fine, give it a Drive Letter F: and name USB 250 if you like. Now your new drive should be ready to use :)

    If you will be replacing an exciting drive and copying the old drive to the new one you will only need to initialize the drive.
    But make sure to use the same partition table as the old drive MBR or GPT.

    Any questions just ask. :)
    My System:
    Case: Thermaltake Core V71 Tempered Glass.
    Motherboard: Asus Prime TRX40-Pro.
    CPU: AMD Threadripper 3970X@Auto OC.
    Water Block: EK Velocity sTR4 copper & nickel.
    Radiator: Thermaltake Pacific CL429 64mm pure copper.
    Water Pump & Res: 320 GPH Pond Pump, 5 Gallon Reservoir.
    Memory: 64 gigs Corsair Vengeance DDR4-3600 18-19-19-39 CR1.
    Video Card: Asus TUF AMD RX 6900XT OC 16 gigs
    Hard Drives: 1 Crucial 256gig M550, 2 Crucial 2TB SSD's,
    1 WD 10TB 256meg cache, 1 WD 5TB 128meg cache, 2 Seagate 4TB 256meg cache.
    Power Supply: Corsair 1050 watt SINGLE RAIL.
    OS's: LINUX Xubuntu 20.04 LTS x64 and Windows 10 Pro.
    This post was edited by beast-usa (Admin) at November 1, 2018 12:29 PM PDT
      November 1, 2018 12:07 PM PDT
    0