Forum » Happy As Is » Happy Computer Service » All VIP 1+ Members » Printer, Scanner, Monitor, Keyboard, Mouse Problems.

Printer, Scanner, Monitor, Keyboard, Mouse Problems.

  • If you are using Windows lol I feel bad for you! If you are using Linux you won't have these problems.

    Windows 7, 8, 8.1 & 10 will all have problems randomly losing connection to things that worked fine yesterday or even five minutes ago. Here are a few things to try that fix 99% most Windows problems.

    1. Windows is garbage and restarting the computer when anything stops working, this will fix most Windows problems. If this doesn't fix it go to number 2.
    (Software, Hardware, Sound, Printers, Monitors, Keyboards, Mouse...)

    2. Turn off the computer, unplug the power cord, unplug the device (Printers, Monitors, Keyboards, Mouse...) that's not working. If the device has power (Printer, Scanner, Monitor) also shut it down and unplug it. Then plug everything back in and turn everything back on. If this doesn't fix it go to number 3.

    3. Check the inside of the computer if you see a ton of dust clean it. Check the wires and cables make sure they are all plugged in and working. Replace any that look bad, replace the USB cables if you have extra's. If it's still not working the device maybe need to be replaced. Check it on another computer if you have one.
    My System:
    Case: Thermaltake Core V71 Tempered Glass.
    Motherboard: Asus Prime TRX40-Pro.
    CPU: AMD Threadripper 3970X@Auto OC.
    Water Block: EK Velocity sTR4 copper & nickel.
    Radiator: Thermaltake Pacific CL429 64mm pure copper.
    Water Pump & Res: 320 GPH Pond Pump, 5 Gallon Reservoir.
    Memory: 64 gigs Corsair Vengeance DDR4-3600 18-19-19-39 CR1.
    Video Card: Asus TUF AMD RX 6900XT OC 16 gigs
    Hard Drives: 1 Crucial 256gig M550, 2 Crucial 2TB SSD's,
    1 WD 10TB 256meg cache, 1 WD 5TB 128meg cache, 2 Seagate 4TB 256meg cache.
    Power Supply: Corsair 1050 watt SINGLE RAIL.
    OS's: LINUX Xubuntu 20.04 LTS x64 and Windows 10 Pro.
    This post was edited by beast-usa (Admin) at June 4, 2021 9:07 AM PDT
      October 4, 2018 9:58 AM PDT
    0
  • HP Printers

    1. Always restart the computer and the printer.
    If it's wireless MAKE SURE THE WIRELESS LIGHT ON THE PRINTER IS LIT UP IT's NORMALLY BLUE.
    AND IT IS CONNECTED TO YOUR WIRELESS NETWORK.

    2. Make sure your printer and computer are on the same network.
    You may have one to three different networks. Joe's home network or work (wired), Joe's 2.5 ghz, Joe's 5 ghz, Joe's 5.2 ghz.
    If the computer is WIRED it should work with the printer on any of the wireless network.
    If the computer is on WIRELESS MAKE IT'S ON THE SAME WIRELESS AS THE PRINTER.
    The printer is on Joe's 2.5 ghz the computer MUST BE ON Joe's 2.5 ghz.
    To NOT get HACKED as easy the printer and your computer should be wired! EVERYTHING WIRELESS CAN BE HACKED!

    3. If you have changed networks on the computer or the printer to make them match?
    You need to restart both the printer and the computer if either one was changed.

    4. HP printer support videos
    HP's website:
    https://supportvideos.ext.hp.com/category/videos/printers-and-all-in-ones

    HP's youtube (google-tube) channel:
    https://www.youtube.com/user/HPPrinterSupport

    Any questions please ask here. :)
    My System:
    Case: Thermaltake Core V71 Tempered Glass.
    Motherboard: Asus Prime TRX40-Pro.
    CPU: AMD Threadripper 3970X@Auto OC.
    Water Block: EK Velocity sTR4 copper & nickel.
    Radiator: Thermaltake Pacific CL429 64mm pure copper.
    Water Pump & Res: 320 GPH Pond Pump, 5 Gallon Reservoir.
    Memory: 64 gigs Corsair Vengeance DDR4-3600 18-19-19-39 CR1.
    Video Card: Asus TUF AMD RX 6900XT OC 16 gigs
    Hard Drives: 1 Crucial 256gig M550, 2 Crucial 2TB SSD's,
    1 WD 10TB 256meg cache, 1 WD 5TB 128meg cache, 2 Seagate 4TB 256meg cache.
    Power Supply: Corsair 1050 watt SINGLE RAIL.
    OS's: LINUX Xubuntu 20.04 LTS x64 and Windows 10 Pro.
    This post was edited by beast-usa (Admin) at February 7, 2020 10:12 PM PST
      July 9, 2019 11:38 AM PDT
    0
  • Printer stopped printing:

    Printer is connected, setup, all drivers installed was printing and stopped after one document?

    When a printer doesn't PRINT ONE PAGE - STOP PRINTING! You just keep filling up the print que.
    With Windows it must print the next thing on the list. Windows can NOT skip one bad page t just won't print anything else.
    Most people will just keep trying and trying by sending 10, 20, 30 new print jobs to the printer. :( Definition of INSANITY? :)

    So when ONE DOCUMENT DOESN'T PRINT - STOP PRINTING!

    1. Bottom right if your taskbar is on the bottom. Top right if your taskbar is on top, click the little white arrow to see hidden icons.
    2. Look for "What's Printing" left click or double left click and open that box.
    3. Either (that's Ether NOT I-ther) right click and cancel on the print job with an error or if you have sent 20 jobs to the que?
    Check on file menu look for CANCEL ALL PRINT JOBS.
    4. Once they all delete try printing something else. NOT the same page or print job that would not print last time.
    (It's Winblows so it can take up to 5 minutes depending on how many things are in the print que)
    5. If something else prints without a problem? Check the original document that would not print, make sure it's not write-protected, corrupt, bad characters...

    If you still have things that will not delete from the print que?
    1. Turn of the printer, unplug the printer.
    2. Search "Services" (Search box is on the menu or taskbar) scroll down looking for "Print Spooler", right click and select STOP.
    (leave services open)
    3. Open your Windows File Explorer ( NOT INTERNET EXPLORER), Go to the folder C:\Windows\Sytem32\spool\PRINTERS and delete all the items in that folder.
    4. Go back to the services window you left open and right click "Print Spooler" and select start.
    5. plug the printer back in, turn it back on and try to print again?

    If it's printing all is good!
    If it's still not printing ANYTHING it could be a bad printer, low ink or toner, bad drivers...
    My System:
    Case: Thermaltake Core V71 Tempered Glass.
    Motherboard: Asus Prime TRX40-Pro.
    CPU: AMD Threadripper 3970X@Auto OC.
    Water Block: EK Velocity sTR4 copper & nickel.
    Radiator: Thermaltake Pacific CL429 64mm pure copper.
    Water Pump & Res: 320 GPH Pond Pump, 5 Gallon Reservoir.
    Memory: 64 gigs Corsair Vengeance DDR4-3600 18-19-19-39 CR1.
    Video Card: Asus TUF AMD RX 6900XT OC 16 gigs
    Hard Drives: 1 Crucial 256gig M550, 2 Crucial 2TB SSD's,
    1 WD 10TB 256meg cache, 1 WD 5TB 128meg cache, 2 Seagate 4TB 256meg cache.
    Power Supply: Corsair 1050 watt SINGLE RAIL.
    OS's: LINUX Xubuntu 20.04 LTS x64 and Windows 10 Pro.
    This post was edited by beast-usa (Admin) at November 17, 2020 10:19 AM PST
      September 5, 2019 8:18 AM PDT
    0