Forum » The Geeks Corner » General Computer Help » HP Wireless Printer - Scanner Help

HP Wireless Printer - Scanner Help

  • 1 158
    1. Always restart the computer and the printer.
    If it's wireless MAKE SURE THE WIRELESS LIGHT ON THE PRINTER IS LIT UP IT's NORMALLY BLUE.

    2. Make sure your printer and computer are on the same network.
    You may have one to three different networks. Joe's home network or work (wired), Joe's 2.5 ghz, Joe's 5 ghz, Joe's 5.2 ghz.
    If the computer is WIRED it should work with the printer on any of the wireless network.
    If the computer is on WIRELESS MAKE IT'S ON THE SAME WIRELESS AS THE PRINTER.
    The printer is on Joe's 2.5 ghz the computer MUST BE ON Joe's 2.5 ghz.
    To NOT get HACKED as easy the printer and your computer should be wired! EVERYTHING WIRELESS CAN BE HACKED!

    3. If you have changed networks on the computer or the printer to make them match?
    You need to restart both the printer and the computer if either one was changed.

    4. HP printer support videos
    HP's website:
    https://supportvideos.ext.hp.com/category/videos/printers-and-all-in-ones

    HP's youtube (google-tube) channel:
    https://www.youtube.com/user/HPPrinterSupport

    Any questions please ask here. :)
    Thermaltake Core V71, Water cooled, Raystorm Waterblock, 270 GPH Pond Pump, 5 Gallon Reservoir, Asus Rampage v Extreme (Bios 3101), Intel i7-6950X Extreme Edition @4000MHZ, 64 gigs Crucial Ballistix Tractical DDR4-3000 15-15-15-33 CR2, EVGA RTX 2080 TI XC, Hard Drives Crucial M550's Raid-0, Crucial SSD 1TB gig, 2 Western Digital 5TB 128meg cache, 2 Seagate 4TB 256meg cache, Corsair 1050 watt SINGLE RAIL, OS LINUX Xubuntu 18.04.2 x64
      July 9, 2019 11:37 AM PDT
    0